Our Product Range |
| |
|
|
|
|
Air Compressors - Reciprocating
AIRMECH are one of the largest suppliers of air compressors in the UK.
We can supply a complete range of reciprocating air compressors from High pressure compressors to 5000psig (350bar).
Two stage vacuum pumps up to 600 cfm.
Oilless compressors to 100cfm
Natural gas compressorsClick here for more information [Back to top]
|
 |
|
|
Air Compressors - Screw Type
Airmech have supplied hundreds of screw compressors in the Uk and abroad. We can supply screw compressors from 30 cfm to a massive 3000 cfm all in a complete package.
Single stage
Two stage
Oil free
VFD (Variable frequency drive)
These are all within our scope of supply and you will not find an application in your plant where we cannot find a solution.Click here for more information [Back to top]
|
 |
|
|
Air Dryers
Airmech can supply any make of manufacture of air dryer, but the main thing you get from us is a guarantee that whatever we supply has been thoroughly researched for price, quality and reliability.
We can supply a complete range of refrigerated or desiccant air dryers from 5 to 3000 cfm.Click here for more information [Back to top]
|
 |
|
|
Anti Static Equipment
Meech Static Eliminators have identified the need for a cost-effective range of electronic grade ionisation equipment. This equipment can be purchased on-line and is normally available from stock ready to be shipped anywhere in the world at a moments notice.
This advanced range of static control products from Meech is specifically aimed at the Electronics and Cleanroom industries.Click here for more information [Back to top]
|
 |
|
|
Booster Units
When you find your factory compressed air system has not enough pressure to run your newly purchased specialised piece of equipment do not despair. AIRMECH can provide you with a booster system that can increase your air pressure to any pressure your system requires 7bar to 100bar(100psig to 1500psig) or more.
We can design and tailor the system for your specific application.Click here for more information [Back to top]
|
 |
|
|
Breathing Air
AIRMECH are aware of the importance of breathing air and have the facility for breathing air testing of any relevant points within your system which could be detrimental to operator safety. We are also major suppliers of breathing air filtration.
The Domnick Hunter BA-1400B portable breathing air purifier was designed to provide high quality breathable air from any compressed air source. Click here for more information [Back to top]
|
 |
|
|
Control Systems
Airmech can provide control systems for any compressor application.
A simple two-compressor control to any multiple of compressors.
We can provide standard equipment or design a system for your specific application.
A simple audit by one of our expert compressor engineers will tell you all you need to know for free.
A consultant will cost you £500/day.Click here for more information [Back to top]
|
 |
|
|
Drains
BEKOMAT electronically level controlled condensate drains, with over 500.000 installations world-wide, have been synonymous with safe, dependable and economical condensate management.
The proven technical features of the BEKOMAT condensate drain, embodied in a range of different models, offer you the right drain type suitable for your particular application.Click here for more information [Back to top]
|
 |
|
|
Filters
Domnick Hunter has been providing solutions to compressed air and gas problems for more than 35 years.
OIL-XPLUS high-efficiency filters with pipe sizes from 1/4" to 12" are capable of removing particulate matter, liquid oil and water droplets, oil odours and vapour.
With air quality conforming to ISO 8573.1 standard, companies worldwide rely on British made OIL-XPLUS high-efficiency filters from domnick hunter to clean up their compressed air and gases.
OIL-XPLUS filters are totally reliable and will play an important part in improving production performance and reducing maintenance costsClick here for more information [Back to top]
|
 |
|
|
Nitrogen Generators
Produce nitrogen gas from compressed air simply and cost effectively.
The technology used to produce a continuous flow of high purity N2 is pressure swing adsorption (PSA). This technology uses a combination of molecular sieves to selectively eliminate O2 and other contaminants in the ambient air. Click here for more information [Back to top]
|
 |
|
|
Vortec Products
Vortec manufacture a wide range of products mainly aimed at energy efficiency and increased production.
Their unique cold gun has the effect of being able to cool product during manufacture or by reverse flow to provide heat.
A vast range of energy saving nozzles have been helping industry to reduce compressed air costs for many years.Click here for more information [Back to top]
|
 |
|
